-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Lee (Citlink)
Sent: Tuesday, May 30, 2000 5:04 AM
To: 'Cisco Group Study'
Subject: CCIE Written
Help,
Just passed last CCNP and took my CCIE Written. Would you believe I got a
68% and needed a 70% to pass, I was one unhappy camper.
CL: sorry to hear your bad experience. Now that you know, you'll get it next
time!!!
But the reason I amwritting this is,
1) does any one know if you remove keep alives from a token ring interface
(no keepalive) what will happen?
CL: I'm sure someone does. Sorry I can't answer this one. Token ring in one
reason I am not ready yet :->
2) In a point to multi-point frame relay config if all remote sites can get
to the hub site in a hub and spoke scenerio but the remote sites can't get
to each other what is the most likely cause.
CL: This is well covered in a number of sources, including Caslow. It is
apparently one of the gotchas that can make your lab impassible. No surprise
here that it is on the written. Think inverse arp and frame relay mapping.
I don't know if I missed these, but I was uncertain if I got them right.
Also it is a good idea to know your RIF backwards and forwards.
CL: I believe you mean canonical and non-canonical :->
Thanks,
Lee
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
