"Quadri, Habeeb" wrote:
>
> Hi all,
>
> I need to suppress messages going out from line vty virtual terminal to snmp
> server. This router is host for x.25 connectvity and translates a x.25
> session to a ip session using "translate" command. Each time a session is
> started or closed a snmp trap is sent to the snmp server. I don't have any
> interfaces to apply "no snmp trap link-status" command as it will work if an
> interface exist, for ex. Group-Async as in configuration for AS5200. This is
> a line vty configuration issue and i don't see any snmp commands when i go
> to config t - line vty XX configuration mode.
check the router config for logging. maybe you have the logging active
for vty x or the monitor active on your current vty
do you have somthing like
logging monitor errors
or
terminal monitor
on respective vty's?
> Appreciate any thoughts.
>
> Thanks.
regards,
--
Dragos Adrian DOBRE
Network Systems Specialist
Deuroconsult Brasov, Romania
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
