Hi Atif,
Thanx for the prompt response....Err...What's the command to do that on the
2924 switch.....:(
Choy Wai Yew
-----Original Message-----
From: Atif Awan [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 01, 2000 5:58 PM
To: Choy, Wai Yew; 'Cisco Groupstudy'
Subject: Re: Sniffer in switch
Configure the SPAN ( Switched Port Analyzer ) feature on the switch.
Regards
Atif
----- Original Message -----
From: Choy, Wai Yew <[EMAIL PROTECTED]>
To: 'Cisco Groupstudy' <[EMAIL PROTECTED]>
Sent: Thursday, June 01, 2000 2:34 PM
Subject: Sniffer in switch
> Hi all,
>
> I've this sniffer that plug into one of the port in a Cisco 2924 switch.
But
> I can't capture any traffic except my sniffer...I come to realise that
> switch don't broadcast to other ports...How can I set the sniffer port so
> that I can capture other machine traffic...
>
>
> Thank you and Best Regards...
>
> With regards,
> Choy Wai Yew
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
