Hi,
Why do you want to change the MTU size.... You are going to walk into
serious issues if you do.
Robert
"Clark, Jason" wrote:
>
> Good Morning
>
> I am trying to manually set the MTU size on a 2611 and am receiving the
> following message % Interface Ethernet0/0 does not support user settable
> mtu." Is it not possible to manually set the MTU size on Ethernet
> interfaces?
>
> TIA
>
> Jason
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
------------------------------------------------------------------------------
Robert LAKE MSc - Customer Support Engineer | |
E-Mail: [EMAIL PROTECTED] | |
Phone : +32 2 704 5434 ||| |||
Fax : +32 2 704 5804 ||||| |||||
Parc Pegasus ..:|||||||:...:|||||||:..
De Kleetlaan, 6 C i s c o S y s t e m s
B-1831 - Diegem - Belgium Euro TAC - Brussels
------------------------------------------------------------------------------
Cisco Systems - Empowering the Internet Generation
------------------------------------------------------------------------------
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
