Dialer maps are considered legacy DDR, Like frame-relay map statements,
while dialer pools are the new kids on the block. Why Cisco's IOS does not
permit both kinds of statements to be used on one BRI interface is a
question for the developers I think.
You should just be able to configure legacy DDR, with multiple map
statements on the BRI interface. Or make both dialer interfaces part of the
same dial pool. So both will have "Dial pool 1" lets say. Because even if
you have different dialer interfaces they can be part of the same dialer
pool.
Hope this helps.
EF
-----Original Message-----
From: Choh Koon Tan [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 05, 2000 10:35 AM
To: [EMAIL PROTECTED]
Subject: Dialer Pool & Dialer Rotary
Hi all,
As far as I knew is the Dialer pool, pool-member command allowed us to
assigned a number of dialer profiles to a physical interface.
Dialer rotary-group is only aassign One Dialer profile to one interface
only.
I had int Dialer0 which is configure to dial to remote office and Dialer1 is
configure to dial into the ISP. I had only one physical ISDN interface and I
would like to assign both dialer profile to the BRI interface. Dialer pool
can do the job, but not dialer rotary-group.
While I configure it I realise that I can't assign dialer pool IF , i had
the dialer map map in used.( Dialer0 is configure using Dialer Map & Dialer
1 is without Dilaer Map )
Can anyone here tell me why dialer pool is not applicable if dialer map is
active ??? How can I share single physical BRI interface when i had one
dialer profile with dialer map, and another dialer profile is without dialer
map ???
Thanks.
[EMAIL PROTECTED]
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
