Hi Duncan,
With NAT you will need 100 ip address to allow 100 connections or you
can limit the amount of web connectivity by only allowing say 10
connections.
However with PAT you only need one outside address because you are using
the port addresses.
Regards
Robert
Duncan Maccubbin wrote:
>
> I'm wondering what NAT gives me over PAT. On my PIX I believe it can do
> 65,000 translations on PAT. If I have <100 users behind it what is the
> advantage of using NAT?
>
> Duncan
> ===========================================
> Duncan Maccubbin | [EMAIL PROTECTED]
> Senior Network Engineer
> MCP+I,MCSE,CCNA,CCDA,CCNP
> CapuNet, LLC - Corporate Internet Solutions
> (301) 881-4900 x8039
> ===========================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
------------------------------------------------------------------------------
Robert LAKE MSc - Customer Support Engineer | |
E-Mail: [EMAIL PROTECTED] | |
Phone : +32 2 704 5434 ||| |||
Fax : +32 2 704 5804 ||||| |||||
Parc Pegasus ..:|||||||:...:|||||||:..
De Kleetlaan, 6 C i s c o S y s t e m s
B-1831 - Diegem - Belgium Euro TAC - Brussels
------------------------------------------------------------------------------
Cisco Systems - Empowering the Internet Generation
------------------------------------------------------------------------------
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
