Dennis,
When running in hybrid (non IOS mode) on the 6509, this allows the
multilayer shortcut-switching feature to work with the supervisor module.
The MSFC is the equivalent of a Netflow Feature Card (NFFC) and RSM in the
5000 series. If the command was not there, all packets in a flow would be
routed by the routing module, rather than only the first one. When MLS is
enabled with 'mls rp ip', followed by the equivalent commands in the
switching IOS, the first packet is routed, the rest are shortcut switched in
an NFFC equivalent fashion.
Chris M.
> -----Original Message-----
> From: Dennis Ighomereho
> To: [EMAIL PROTECTED]
> Sent: 6/5/00 7:30 PM
> Subject: mls rp in 6509
>
> Hi,
> Could anyone tell me what this does.
>
> int vlan 1
> mls rp ip
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
