Scott, it depends. Let me clarify and see if this helps. You only need to
turn off split horizon with eigrp on the hub router if and only if you are
using a point-to-multipoint subinterface on the hub router. If all your
interfaces are point-to-point (which they probably should be), then you will
not have a split-horizon problem. Let me know if you have further questions
and we can clear them up. BTW, you do not need to turn off split horizon on
point-to-point subinterfaces, only multipoint subinterfaces.
Regards,
David Wolsefer, CCIE #5858
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Scott Livingston
Sent: Tuesday, June 06, 2000 1:16 PM
To: [EMAIL PROTECTED]
Subject: [Fwd: Morning]
can someone help out here please? THANKS!
subject:
Morning
Date:
Tue, 06 Jun 2000 07:50:00 -0500
From:
Scott Livinston <[EMAIL PROTECTED]>
To:
[EMAIL PROTECTED], Jon Helmer <[EMAIL PROTECTED]>
This is reference to Mr. David Wosefer's white paper about Frame Relay..
David,
We are currently running a small F.R. network over here and something
you wrote contradicted what we currently have in operation.. Currently
we have a hub and spoke topology, 3 spokes to be exact... we are an IP,
partial meshed network running subinterfaces and EIGRP.. You mentioned
in your paper that you need to turn off ip split-horizon on the
subinterfaces if the spokes are to know about the other spokes
networks.. Well in our case we don't have ip split horizons turned off
and the spokes know about all other spokes... How could this be? I had
my lead engineer look @ this and we both cant figure out this
discrepancy between what you published and what we are currently running
over here... If you get some time could you please show me where i might
be lost? Thanks for your help!
--------------------------------------------------
Scott M. Livingston
Network Engineer (CCNP)
12851 Foster
Overland Park, KS 66213
800.888.7535
913.402.7844 x1056
913.814.7849 Fax
"Make every swing as if it were your last"
-Gary Schroer
--------------------------------------------------
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
