Hi
You should use "ip rtp priority" plus WFQ or CBQWFP or "ip rtp reserve"
Custom queueing is not the best solution for voice, because you need
strict
priority ..
In both cases I would recomend to use L2 fragmentation if your interface
is below 1 Mbits (FRF.12 or ppp interleaving)
The ports are usually above 16384.
Example (i skip irrelevant info, this reserve 48 kbps and 20 udp voice
ports ):
in s0
encapsulation ppp
ppp multilink
multilink virtual template 1
in lo0
ip address xxxx
int virtual-template 1
ip unnumbered lo0
ip rtp reserve 16384 20 48
ppp multilink
ppp multilink fragment-delay 15
ppp multilink interleave
--
---
Javier Contreras Albesa
Standard Trainer
PRO IN Training S.L.
PROfessional Information Networks
World Trade Center, Moll de Barcelona S/N
Edif Sur, Planta 4
Phone: (+34) 93-5088850 E-mail:
[EMAIL PROTECTED]
Fax: (+34) 93-5088860 Internet: http:// www.proin.com
SHAPING THE FUTURE - BE PART OF IT!
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
