hope it works for you because it did for me this afternoon on 802 router,not
with 6 spids though.
1 check spid nos
2check time - show clock
3if not correct set clock-- clock set xx:xx:xx 22 june 2000
4do ''wr''
5 power cycle the router
6 check spid and clock again
praveen walia
Equant
""Ken Yeo"" <[EMAIL PROTECTED]> wrote in message
8irilg$5v3$[EMAIL PROTECTED]">news:8irilg$5v3$[EMAIL PROTECTED]...
> Hi all,
>
> I am setting up a 128k ISDN internet connection for my client using a
Cisco
> 802. We use a local phone company for the ISDN line and another company as
> the ISP. The unusual setup (at lease for me) is the ISDN line has 6 end
> points, with 6 SPIDs, and 6 LDN. One the configuration form, the TERM TYPE
> NODE is BASIC VOICE (A).
>
> I couldn't get the connection up so I called the ISDN carrier and have
them
> tested the line. They did some remote loopback tests to the NT1 and swore
> the line is good, and told me to use two out of the 6 SPIDs.
>
> Below are the results for SHOW ISDN STATUS and DEBUG ISDN EVENTS. I am
still
> learning how to troubleshoot ISDN, I suspect it has something to do with
the
> SPIDs, and I think it is a fault with the Telco switch configuration. But
I
> am not sure what is the exact cause for the problem, anyone has any ideas?
>
> The startup-config is also identical to the standard configuration from
> Cisco web site:
>
>
http://www.cisco.com/warp/public/779/smbiz/service/configs/isdn/isdn_isp_cha
> p.htm
>
> TIA,
> Ken.
> _______________________________________________________________________
> SHOW ISDN STATUS:
>
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-5ess
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 89, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> Spid Status:
> TEI 89, ces = 1, state = 8(established)
> spid1 configured, spid1 NOT sent, spid1 NOT valid
> TEI Not Assigned, ces = 2, state = 1(terminal down)
> spid2 configured, spid2 NOT sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 1
> CCB:callid=0, sapi=0, ces=1, B-chan=0, calltype=INTERNAL
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 1
> ________________________________________________________________________
> DEBUG ISDN EVENTS:
>
> 02:00:53: ISDN BR0: Outgoing call id = 0x800E, dsl 0
> 02:00:53: ISDN BR0: Event: Call to 6181009 at 64 Kb/s
> 02:00:53: ISDN BR0: process_bri_call(): call id 0x800E, called_number
> 6181009, s
> peed 64, call type DATA
> 02:00:227640835916: CC_CHAN_GetIdleChanbri: dsl 0
> 02:00:227633307648: Found idle channel B1
> 02:00:227633307648: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x800E
> 02:00:227633266688: ISDN BR0: Error: Unfound B-channel on Disconnect_Ack -
> calli
> d 0x800E
> 02:00:227633307648: ISDN BR0: HO.ST_DISC_ACK Voice cid 0x800E error....
> 02:01:23: ISDN BR0: Event: Hangup call to call id 0x800E
> 02:01:23: ISDN BR0: process_disconnect(): call id 0x800E, call type is
DATA,
> b_i
> db 0x27CEF38, ces 1
> 02:01:99660345651: CC: dsl 0 No CCB Src->HOST cid 0x800E, ev 0x5 ces 1
> 02:01:98791857956: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x800E
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
