Or use control-P for "P"revious command... control-N ("N"ext) is the
same as the down-arrow.
There's probably a way to cnfigure HyperTerminal so the arrows work
properly, but I just always use the control-codes for cursor movement.
""Douglas James Howe"" <[EMAIL PROTECTED]> wrote in message
8it7j8$vv6$[EMAIL PROTECTED]">news:8it7j8$vv6$[EMAIL PROTECTED]...
> Telnet into a router using the DOS box.
>
>
> ""Westmoreland, Alexis"" <[EMAIL PROTECTED]> wrote
in
> message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I have noticed that the up arrow does not work (to repeat the line
on
> cisco
> > routers) with the Win2000 vers of HyperTerminal. Does anyone know
a fix
> for
> > this problem? I have tried upgrading it to no avail.
> >
> > Thanks in advance.
> >
> > Thanks
> >
> > Alexis A. Westmoreland
> > Getronics
> > Network Engineer
> > (713)852-5402
> >
> > ___________________________________
> > UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
