Hi all,
I hope someone can help me understand something about PPP multilink. I was
reading up on it, and checking the routers at my job to verify that it was
working. Whenever two routers have a dial connection using BRIs and they
are configured to use PPP Multilink (PPPM), they work fine and the command
"show ppp multilink" gives me info about them.
We have a 3640 with a PRI that a bunch of local routers with BRIs use for
dialup. The BRIs are configured for PPP multilink, but the PRI is not.
Over the weekend I tried getting it to work. I have also read several
articles on CCO and read the section in ACRC on PPPM, but have found no
configs for PRI and PPPM. So, I think that it probably cannot be done, but
I am not sure why.
My two questions:
1. When the local routers call up and bring up two B channels, they are not
using PPPM. How does the data flow differ in this instance from a PPPM
connection?
2. What is different about a PRI that does not allow the PPPM to be
configured?
Thanks,
Dave
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
