I haven't worked with route maps much, so this is just a first guess, but I
noticed your second permit doesn't have a match statement. Do you have a
match set up for the next statement you are wanting to do?
>
>Hi All,
>
>I am using Route Maps to assign different metrics to routes learned from
>the
>same routing protocol,
>a)I defined the access-list,
>b)defined the route map and the metric
>route-map CCIE permit 23
>match ip address 1
>set metric 69 100 255 1 1500
>!
>route-map CCIE permit 20
>set metric 59 100 255 1 1500
>c)applied the route map to the redistribution statement
>redistribute rip route-map CCIE
>
>Successfully, I was able to do it for two routes, I've tried for more than
>2
>and it doesn't work!!! Is this possible? If yes, what am I missing?
>Thank you all
>Cristina
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
