SH -
What does the current setup look like? What type of routing is currently
being used? For instance, if you are running ospf, most of this is already
taken care of for you. If you running static routes, you will need to do
some work, but not much.
Joe
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
SH Wesson
Sent: Wednesday, June 21, 2000 12:08 PM
To: [EMAIL PROTECTED]
Subject: two T1s
I'm at one location with two T1s to corporate. How can I configure these
two T1s to load balance each other, provide redundancy for each other etc.
For instance, if one T1 goes down, all traffic that normally goes through
that T1 would now be re-routed to the other T1 which is up. Also is there a
way to sort of multiplex or in Catalyst switch term port-channel, so that
these two T1s can be load balancing and redundant.
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
