Check that you dont have passive interface enabled on that interface .
A passive interface will receive updates but will not send out any .
Regards
Olden
-----Original Message-----
From: Omer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 28, 2000 3:18 AM
To: Cisco Group Study
Subject: suppressing null update
Hello,
My router,R3, does not send any rip update. Bellow is the output of the
debug ip rip command on R3. How can configure
the router so that RIP updates are sent?
Omer
R3#debug ip rip
RIP protocol debugging is on
R3#
RIP: sending v1 update to 255.255.255.255 via Serial0 (180.180.2.2) -
suppressin
g null update
RIP: received v1 update from 180.180.2.1 on Serial0
170.170.0.0 in 1 hops
170.16.0.0 in 1 hops
166.166.0.0 in 2 hops
_____NetZero Free Internet Access and Email______
http://www.netzero.net/download/index.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
