this will definitely work, but I had some problems dialing into my ISP &
getting assigned an IP address dynamicaly, any hints ?
'Bliss'
Olden Pieterse <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi there
> Here is my shot in the dark on this one .
> First configure yor aux port , I think its line 0
> so...
> conf t
> line aux 0
> speed 38500
> modem inout ( so you can call in & out)
> transport input all (so it'll take anything , but change it to your
fancy
> )
> transport preferred telnet (so if you telnet you dont have to wait)
> autoselct ppp
> modem autoconfigure type usr_courier
> flowcontrol hardware
> exec-timeout 0 0
> exec
>
> logical setup
> interface async 1 (uax 0 === async 1)
> ip unnumbered ethernet 0
> ip tcp header-compression passive
> encap ppp
> async default ip address x.x.x.x (keep this address in the same subnet as
> your ethernet 0)
> async mode interactive
>
> I got this at www.cisco.com/warp/701/6.html
>
> It explains it really well !
> Hope it helps
>
> Cheers
> Olden
>
>
> -----Original Message-----
> From: Atef Rostom [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 28, 2000 12:16 PM
> To: [EMAIL PROTECTED]
> Subject: Analog Dial Backup
>
>
> Hi All,
>
> I am trying to configure a 1720 to use the Aux port as a backup for the
> serial port.
>
> I want it to dial using a USRobotics Courier modem.
>
> Please tell me if you tried this before.
>
> Thanks, Atef
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
