you need to switch it to anothet interface to transfer the dlci...
u need an input and output port for a frame switch
-----Original Message-----
From: Billy Monroe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 2:59 PM
To: [EMAIL PROTECTED]
Subject: Frame-Relay using two routers
Sorry I know this question has been discussed before but I couldn't find the
e-mail regarding this one...
I have two routers (Router1 is the DCE) and when I configure Router1 as a
switch it returns the message '**Can not switch on same interface'.
Can you tell me why is not working ?
Here is the configuration:
!
hostname fakeswitch
!
frame-relay switching
int s0
no ip address
encap frame-relay
clockrate 38400
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 100 int serial0 135
** can not switch on same interface
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
