Hello World,
Question 1
I was debugging NAT on a cisco 2501 running IOS 12.0(6) and tried to
filter the output of "debug ip nat", as I usually do with other debug
output, with the command
#debug ip nat 10
The access-list 10 exists and it works.
Always I used debug with access-list I got a confirmation like "IP
packet debugging is on for access list 10" after entering the command.
With the command above get a simple confirmation like "IP NAT debugging
is on", no mention of access-list.
Is this a bug? May my access-list be wrong?
Question 2
On debugging NAT yet, I got the following output:
2w4d: NAT: i: tcp (172.16.2.1, 10008) -> (192.168.1.31, 23) [56131]
2w4d: NAT: ipnat_allocate_port: wanted 10008 got 10008
2w4d: NAT: o: tcp (192.168.1.31, 23) -> (200.189.5.21, 10008) [44840]
What means "ipnat_allocate_port: wanted 10008 got 10008" ?
--
[EMAIL PROTECTED]
Engenheiro de Redes.
CREA/MG 66089/D
ICQ# 6372 3382
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
