At my company we currently have a couple 3810's running voice over Frame
Relay with the Cisco 3810's. To go over the WAN we use interface s0:0, but
since we are using Frame Relay we actually used subinterface s0:0.1.
Hope this helps.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Hallgren, Michael
Sent: Monday, July 03, 2000 7:35 AM
To: '[EMAIL PROTECTED]'
Subject: MC3810
Hi,
I've got an MC3810 in stock, and I need to hook up a customer G.703 both
sides (my 7513 the other side).
On my MC3810 I've got an MFT module, so I'd like to run my link over that
port.
At a glance - and presently w/o having had console on the box - I'd go
controller e1 0
clock source xxxxx
mode yyy
etc. Now, what's the interface name under which I may configure IP on the
WAN side ? (The only other interface I want to use is the Ethernet one, for
LAN side.)
mh
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
