Does it work differently if you take out "access-list 5 deny any"? I know
the access-list does an explicit deny anyway but since the rate-limit
command is just matching the IP's it sees in the access-list wouldn't it
match 'any' at that point?
Daniel
-----Original Message-----
From: Russ Kreigh [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 03, 2000 3:23 PM
To: Cisco Group Study
Subject: Rate-limiting
Hi all I posted a question a while back asking how to limit the maximum
speed of an IP address. Well I have kinda got something working that does do
that, but it limits everything!
access-list 5 permit 10.1.1.2
access-list 5 deny any
Ethernet 0
ip address 10.1.1.1 255.255.255.0
ip address 10.1.2.1 255.255.255.0 secondary
rate-limit input access-group 5 128000 128000 128000 conform-action transmit
exceed-action drop
rate-limit output access-group 5 128000 128000 128000 conform-action
transmit exceed-action drop
I want this configuration to limit the bandwidth of IP address 10.1.1.2 to
128k which it does, but it limits everything else also.
Any thoughts on this?
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
