It is common with physical interface frame relay or multipoint that you
can't ping your own interface, but I've not seen this with ptp. To make
self ping work on phy/mp, add a frame map with your local ip and use any
valid dlci.
JOE
CCIE 5917
""psuin1997"" <[EMAIL PROTECTED]> wrote in message
8ju360$khb$[EMAIL PROTECTED]">news:8ju360$khb$[EMAIL PROTECTED]...
> I have a situation where a 1601 R 12.0 (3) is on ptp frame
> at frac T with 1 channel assigned...Everything works
> but I can't ping the private ip using Class A.....However the
> E0 side pings and works fine but can't emulate NAT.......
> Why can't I ping inband on the serial? I have tried numerous
> settings but to no help.....I am using internal T1 WIC and all
> routes are occuring using ip and ipx......Can see both cdp neigh and both
> remote Netware servers...I have never seen where
> you could console in and not ping serial but it would work and route
fine...
>
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
