If you want DLCI 16 on one interface to switch to DLCI 16 on the other AND
DLCI 18 on one interface to switch to DLCI 18 on the other then the config
below will do it for you.
Darren
!
frame-relay switching
!
interface serial 0
encapsulation frame-relay
frame-relay intf-type dce
clock rate ?
frame-relay route 16 interface serial 1 16
frame-relay route 18 interface serial 1 18
!
interface serial 1
encapsulation frame-relay
frame-relay intf-type dce
clock rate ?
frame-relay route 16 interface serial 0 16
frame-relay route 18 interface serial 0 18
!
So effectively you have two PVC's on each
Olden Pieterse wrote:
>
>
> Interface serial 0
> Frame-relay route 18 interface serial 1 16
>
> Interface serial1
> Frame-relay route 18 interface serial 0 16
>
> Thx
>
> Olden Pieterse
> MCP , CCNA , BCMSN , BSCN , BCRAN
> Brainbench Certified CISCO Network Implementation Specialist
> Technical Consultant
> Mobile : +27 82 410 8621
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
