I have the working config.....The only diff. is Frame relay cloud, which
will not make any effect.
voice-port 1/0/0
cptone IN
timeouts initial 5
operation 4-wire
type 5
signal immediate
!
voice-port 1/0/1
cptone IN
timeouts initial 5
operation 4-wire
type 5
signal immediate
!
dial-peer voice 1 pots
destination-pattern 12
port 1/0/0
!
dial-peer voice 2 pots
destination-pattern 12
port 1/0/1
!
dial-peer voice 3 voip
destination-pattern 11
req-qos controlled-load
session target ipv4:20.20.20.1
!
process-max-time 200
!
interface Ethernet0/0
ip address 172.18.12.1 255.255.255.0
no ip directed-broadcast
!
interface Serial0/0
ip address 20.20.20.2 255.0.0.0
no ip directed-broadcast
no ip mroute-cache
fair-queue 64 32 1
ip rsvp bandwidth 16 16
!
Hope this will help.........
Cordially
Hitesh
"pinoal" <[EMAIL PROTECTED]> on 07/06/2000 03:41:40 PM
Please respond to "pinoal" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc: (bcc: harora)
Subject: Voice Problem
I have a setup as below ,
HQ
Site1
E&M Ethernet Ethernet
Frame Relay Ethernet Ethernet FXO
PABX----2621------------2924-----------7507===========
7507-----------2924------2621----PABX
Here are the configs
HQ 2621
voice-port 1/0/0
operation 4-wire
type 5
signal immediate
!
voice-port 1/0/1
operation 4-wire
type 5
signal immediate
!
dial-peer voice 110 pots
destination-pattern +1
port 1/0/0
!
dial-peer voice 4 voip
destination-pattern +2...
session target ipv4:172.18.8.57
!
interface Ethernet0/0
description connected to EthernetLAN
ip address 172.18.168.181 255.255.248.0
no ip directed-broadcast
!
Site1 2621
voice-port 1/0/0
!
voice-port 1/0/1
!
dial-peer voice 10 pots
destination-pattern +2
port 1/0/1
!
dial-peer voice 1 voip
destination-pattern +1...
ip precedence 5
session target ipv4:172.18.168.181
!
!
interface Ethernet0/0
description connected to EthernetLAN
ip address 172.18.8.57 255.255.248.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
!
>From site1 I am able to make a call to HQ and can hear the voice of the
person
in HQ but the person at the HQ is not able to hear my voice.
>From HQ I am able to make a call to site1 , but I am unable to hear the
ringing tone
or the voice of the person at site1 but the person at site1 can hear my
voice.
Where is the problem ? at the router or the PABX ?, at site1 or HQ ?
Any suggestions .
Thanks alot .
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
