As long as your boot rom is ok, you can erase the flash without having to
xmodem a new IOS or config.
After you issue an erase flash: command, reload the router, then it should
boot to the router(boot)> prompt.... At that point, config an IP, a
default route if needed, and issue a no shut on the appropriate interface.
You should be able to do a TFTP at that point, which is much faster than
xmodem over the console port, obviously.
Just my $2/100
Joe Freeman, CCDA
Jim Bond wrote:
> Hello,
>
> I copied IOS file to flash memory but got checksum
> error. I wanted to delete the file but failed. I used
> the command "delete flash:xxxxx" and got "no such file
> or directory" but "show flash" the file is there.
>
> How can I delete the bad flash?
>
> Thanks in advance.
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> Kick off your party with Yahoo! Invites.
> http://invites.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
