Hi,
If you are given a Class C network, eg. 207.96.46.0 and you had to create 3
subnets for 3 floors of your bldg., how would you use routers to connect
these 3 subnets and go out on the Internet? (Without using any internal
addresses ie 10, 172, 192). I know that the mask is going to be
255.255.255.224 with 30 hosts on each subnet. My question is, do you connect
these 3 subnets using the Ethernet interfaces or using the serial? And if
you use either, what would be the ip addressess for the default gateways on
all 3 subnets? How would the hosts on each subnet know how to get to the
other subnet?
Please advise.
Thank you.
Kind regards,
[EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
