If the folloing error occurrs, %Error: This command applies only to DCE
interfaces. Just swap the cables or go to the other router and apply the
clock rate. It is the cable that defines which is DTE or DCE...
Hope this helps,
/James Hilving

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Babashola Madariola
Sent: Thursday, July 06, 2000 11:43 AM
To: [EMAIL PROTECTED]
Subject: Re:




And may I add that the command  :
  router(config-if)#clock rate bps
gave the following:
%Error: This command applies only to DCE interfaces

However int s0 which is shutdown does not give such error when the above
command

is applied to the interface.
But that doesn't mean that it's already made a DCE.

---------------------- Forwarded by Babashola Madariola/C/Africa/Mobil-Notes
on
07/06/2000 05:43 PM ---------------------------


[EMAIL PROTECTED] on 07/06/2000 07:13:10 AM

To:   Babashola Madariola/C/Africa/Mobil-Notes
cc:   [EMAIL PROTECTED]
Subject:  Re:







The command is:   router(config-if)#clock rate bps

Wenderson Duarte
CCNA





"Babashola Madariola" <[EMAIL PROTECTED]>@groupstudy.com
on
06/07/2000 12:28:25

Please respond to "Babashola Madariola"
<[EMAIL PROTECTED]>

Sent by:  [EMAIL PROTECTED]


To:   [EMAIL PROTECTED]
cc:

Subject:




Hi
Would like to know the commands issued to make a router a DCE.

Thanks in advance


___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]





___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
  • Re: Babashola Madariola
    • James Hilving

Reply via email to