OK....let me first apologize for not being clear.
the frame-relay config is for the router that will be designated to be the
frame-relay cloud(TELCO).
if you want to do a point to point (NOT FRAMERELAY),all you need to do is
set clock on the interface to be (DCE).
in order for you to see which of the interfaces is the DCE after you connect
the serail cable in the interfaces of both routers, is by doing the "show
controllers" command. you will see which one of the serial ports have the
DCE CABLE.
hope this is a little more clear.....good luck
Raul Renteria.ccna.network analyst.nyc
>From: Michael Losa <[EMAIL PROTECTED]>
>Reply-To: Michael Losa <[EMAIL PROTECTED]>
>To: RAUL RENTERIA <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: Re: router a DCE
>Date: Thu, 6 Jul 2000 12:56:07 -0700 (PDT)
>
>Is there any documentation on this? I have two 2610s each with a 56k/64k
>DSU/CSU card. I would like to connect them through this interface. I
>tried
>the commands below, however some of them the router told me were not valid
>commands. Any help would be greatly appreciated!!!
>
>Mike
>
>--- RAUL RENTERIA <[EMAIL PROTECTED]> wrote:
> > this is for a back to back frame relay lab...
> >
> > frame-relay switching
> > frame-relay intf-type dce
> > frame-relay route (dlci)interface (int)(dlci)
> > clockrate 64000
> > no shut
> >
> > hope it helps.....
> > Raul Renteria.ccna.network analyst.nyc
> >
> > >From: "Babashola Madariola" <[EMAIL PROTECTED]>
> > >Reply-To: "Babashola Madariola" <[EMAIL PROTECTED]>
> > >To: [EMAIL PROTECTED]
> > >Date: Thu, 6 Jul 2000 12:28:25 +0100
> > >
> > >
> > >
> > >Hi
> > >Would like to know the commands issued to make a router a DCE.
> > >
> > >Thanks in advance
> > >
> > >
> > >___________________________________
> > >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > >FAQ, list archives, and subscription info: http://www.groupstudy.com
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>__________________________________________________
>Do You Yahoo!?
>Send instant messages & get email alerts with Yahoo! Messenger.
>http://im.yahoo.com/
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
