Re:

[Circusnuts]

Title:

Pull the FLASH out, let it boot from the ROM's, review & change your configs (change the config register so it will reboot in ROM mode), install the FLASH again (with the router powered down), then Copy TFTP FLASH your image (make sure the image is good- FIRST), & finally change the Config-register back to the 0x2102 (the normal boot & load sequence)...  You may have to modify things a little, but this routine always cures the software induced hardware hang-up's   Have a good weekend !!! Phil ----- Original Message ----- From: Brandon Peyton To: Wayne Cavanough ; Sam. Ng ; Michael Baker ; Douwe Swart ; BIKEMAN Cc: [EMAIL PROTECTED] Sent: Saturday, July 08, 2000 3:19 AM Hey Guys, Still having my problem with my 2611... the router was downloading from a TFTP server and it got cut... and was aborted... now when I try and console in i get no response... and my activity light stays active the whole time as if its still trying to find the TFTP server.. it starts up and blinks like its supposed to when reading from memory... but then ..just hangs i cant get it fixed.  I was wondering if any of you had any clue about what could be happening, or how to "hardware" force it to boot another config/IOS... *shrug* Im not sure other than i cant use the router anymore :( when i console in and use 9600 8-N-1 and press the return key i get CCC with each key press... what now? What do you think? Brandon