Dear friends,
I have a few questions to ask:
1) Our company Network are running at 100M speed. Now if I connect a 10M
speed 3com hub to one of the ports in cisco 2900 switches (100M speed) in
the company network, and I connect 5 pc to the 3com hub, so, the network
speed of PC is 10M divided by 5= 2M each or 10M each?
2) As the users complain about the speed, my boss asked me to use the brand
new 2900 switch (100M speed) to replace the 3com hub. So I connect 2900
switch to 2900 switch that in company network, and connect 5 Pcs to the 2900
switch, so the speed of PC should be 100M each or 100M devided by 5= 20M?
3) But user still complain about the speed, I use the ftp function to check
the speed and found the speed is only 150kb/sec= 0.15M only. I suspect
because the switches that I used is a brand new switch, I havent configure
VLAN and spanning tree protocol on the new switch to block to packet
broadcase, so the speed is slow. If this is the case, can I consult you, how
to configure VLAN and spanning tree on the new switches? Can anyone teach
me? I ever seen the configuration file of a VLAN switches, but I don't know
what command should I type to configure VLAN on 2900 switch. What is the
procedures? Please help.
Thanks in advance.
Regards,
Chee Tong
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
