:-)
I always like to see if I can get to a solution in at least one different
way than the most likely; Sometimes it turnes out to be more efficient like
in this example.
If you want to multiply X with 20 on your computer, you could ask it to do
it like this
Result := X * 20;
But it would actually be done faster, and thereby use less instructions, to
do it like this
Result := (X shl 4) + (X shl 2);
Shifting bits left (or right) and adding takes up less instructions than the
multiply function.
I know this is about 788 lightyears away from setting up a router as a
bridge, but I am just trying to draw a parallel.
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 12:47 PM
To: Ole Drews Jensen; 'Matt'; [EMAIL PROTECTED]
Subject: RE: Quick Puzzle
What is it Howard likes to say? What is the problem you are trying to
create? :->
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Ole
Drews Jensen
Sent: Monday, July 10, 2000 9:54 AM
To: 'Matt'; [EMAIL PROTECTED]
Subject: RE: Quick Puzzle
Hmm, interesting.
Could you by doing so on two routers commicating with each other make them
work like a bridge?
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Matt [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 10, 2000 11:40 AM
To: [EMAIL PROTECTED]
Subject: Re: Quick Puzzle
Make one unnumbered to the other. If you have an IP address configured on
the Serial0 port, go to interface config mode for the Ethernet0 and enter
the command:
"ip unnumbered Serial 0"
Matt
""Kenny Sallee"" <[EMAIL PROTECTED]> wrote in message
00a701bfea31$b4186d20$48a8a8c0@ksallee">news:00a701bfea31$b4186d20$48a8a8c0@ksallee...
How can you configure the same IP subnet on more than one interface in a
Cisco router?
Kenny
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
