The only thing I see in the config is the two static routes on each side.
Both point to the remote network, but their next hops are different. I'd
recommend getting rid of one of them on both side. Do a "show ip route", I
bet it is only showing the static to the Dialer. It's probably not causing
the problem, but it's best to clean it up.
Watch the console port while your doing these pings - see if it's dropping
the call and reconnecting constantly. You'd definitely troubleshoot it
differently if it's constantly dropping.
Also try to force the speed down to 56K on both sides. Maybe the telco has
some old equipment that won't support end-to-end 64Kbps.
Call the telco and ask them to loop to the NT1 and see if they see any
errors.
It's a long shot, but maybe try to swap out the cables that connect the
routers to the ISDN jacks if they look old.
I bet that if you try all those things, you'll come up with something. My
best guess is that the Telco will find errors when they do the loop test.
Good luck,
Matt
"Muhammad Faheem" <[EMAIL PROTECTED]> wrote in message
F10CA2BAB231D211979A00805FC7A31A017A1F71@AFCOMP02">news:F10CA2BAB231D211979A00805FC7A31A017A1F71@AFCOMP02...
> Hi All
>
> I have connected 2 cisco 801 ISDN routers using 64k link , but when i
ping
> from SITE A to SITE B or viseversa
> it replies
>
>
!.!.!.!..!.!.!.!..!.!.!.!.!..!.!.!.!.!.!.!.!.!.!..!..!.!.!.!...!.!.!...!.!..
> !. with 48% Success rate , can any body tell why its not 100%
> am i missing some thing in configuration , pls check the attached
> configuration files
>
> Thanks in Advance.
> <<Router1.txt>> <<Router2.txt>>
>
>
>
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
