Re: 3640 rommom> xmodem -r (download IOS...

Tue, 11 Jul 2000 20:03:14 -0700

Peter,
 
you need the confreg to be 0x2102 - see:
 
 
also on the 36X0s you can do a tftpdnld and drap an image off a tftp server from the rommon mode (damn sight quicker than xmodem'ing it) - need to set up the ip details first tho
 
HTH
 
Andy
----- Original Message -----
From: Peter
Sent: Tuesday, July 11, 2000 5:08 AM
Subject: 3640 rommom> xmodem -r (download IOS...

I did this a few times today.

 

I somehow erased my flash.

So when I reload I go into Rommon>

After my new ios image is downloaded I go into setup mode and configure the router the way I want it.

I do copy run star to save what I have just configured to start-up. Then I double check and make sure it is there by sh start.

Then I reload the router and I’m back in Rommon>. I changed the "confreg 0x2101" and it does the same thing.

It says I have a bad image. (This is the second one I used, so the image is probably good.)

What am I doing wrong?

 

Reply via email to