Sanjay,
Here is the config:
sh runn
Building configuration...
Current configuration:
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname ROUTER
!
enable secret 5 $1$HKrD$TagXWwDM8ld/Jc4YYKiA2/
enable password 7 00071E070F5E19
!
username REMOTE password 7 1061223B2122302A25
!
!
!
!
memory-size iomem 15
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-net3
!
!
!
interface BRI0
description connected to Internet
no ip address
ip nat outside
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
no cdp enable
!
interface BRI1
description connected to REMOTE
no ip address
ip nat inside
encapsulation ppp
dialer rotary-group 2
isdn switch-type basic-net3
no cdp enable
!
interface FastEthernet0
description connected to EthernetLAN
ip address 10.61.85.1 255.255.255.0
ip nat inside
speed auto
!
interface Dialer1
description connected to Internet
ip address 213.42.117.73 255.255.255.248
ip nat outside
encapsulation ppp
no ip split-horizon
dialer in-band
dialer idle-timeout 60
dialer string 4004444
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname kobec-0014
ppp chap password 7 070C244E4102
!
interface Dialer2
description connected to REMOTE
ip address 10.241.86.2 255.255.255.248
ip nat inside
encapsulation ppp
no ip split-horizon
dialer in-band
dialer idle-timeout 60
dialer map ip 10.241.86.1 name REMOTE broadcast 0081789383149
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap
!
ip nat translation timeout 1800
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static 10.61.85.2 213.42.117.74
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.48.80.0 255.255.255.0 10.241.86.1
ip route 10.48.82.0 255.255.255.0 10.241.86.1
ip route 10.49.80.0 255.255.255.0 10.241.86.1
ip route 10.49.81.0 255.255.255.0 10.241.86.1
ip route 10.51.80.0 255.255.255.0 10.241.86.1
ip route 10.60.80.0 255.255.255.0 10.241.86.1
ip route 10.60.82.0 255.255.255.0 10.241.86.1
ip route 10.62.86.0 255.255.255.0 10.241.86.1
ip route 10.192.80.0 255.255.255.0 10.241.86.1
ip route 10.241.0.0 255.255.255.0 Dialer2
no ip http server
!
access-list 1 permit 10.61.85.0 0.0.0.255
dialer-list 1 protocol ip permit
snmp-server engineID local 00000009020000B0C288D9D1
snmp-server community public RO
!
line con 0
exec-timeout 0 0
password 7 0110090A48040A0A
transport input none
line aux 0
line vty 0 4
password 7 095F4B0A0C1712521F190A242E28
login
!
no scheduler allocate
end
Can u post the config? I wil help.
Sanjay
Nahrajieh Anggaon <[EMAIL PROTECTED]> on 11/07/2000 06:38:49 AM
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
cc:
Subject: Monitoring Traffic
Category:
********************************************************************
This message has originated from an open public network and cannot be wholly
relied upon to be authentic.
********************************************************************
Dear friends,
How do you monitor traffic that trigger DDR on a Cisco isdn router? What
command do you use to monitor in real time what station is causing the DDR?
We configured a Cisco 1700 series that dials to two different location. One
is to the internet and one to Head office. The problem is that router is
dialing where no one is using any application. I noticed that after the
router is disconnected, after a few seconds it dialed again.
Thanks in advanced.
Ajie,
CCNA
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
********************************************************************
Any opinions, express or implied, presented are solely those
of the author and do not necessarily represent those of
Standard Chartered Group
********************************************************************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
