The jack pinouts are:
1 RI
2 DSR
3 RTS
4 GND
5 TxD
6 RxD
7 SG
8 CTS
9 DTR
10 DCD
>From this, you can figure out how to make the cable to connect the
PortServer port
to a router console. These are both DTE's, so you'll want the TxD of the
PortServer
to go to the RxD of the console.
To telnet to the console connected to port N, use
telnet portsrv 200N # (2000 + port #)
As for the config, this is what I have, but I am connecting to Unix-host
consoles. It should work for a router console, as well, though:
#> set po ra=1-1
tty termtype dev sess uid edelay auto bin group dport dest
1 vt220 mio 4 0 1 off on 0 0 255.255.255.255
#> set line ra=1-1
tty baud csize parity stopb break error inpck istrip onlcr otab
1 9600 8 N 1 ignore null off off off off
(I'm not sure how the "break" parm will affect your being able to
send a break to the router console -- you may have to experiment.
)
#> set flow ra=1-1
tty ixon aixon ixoff ixany itoss altpin rts dtr cts dcd dsr ri
1 on off off off off off off off off off off off
#> set login ra=1-8
tty cmdprompt logprompt passprompt write login passwd verbose message
1 digi> login: passwd: off on on off none
-------------------------------------------------
Tks��� ��� | <mailto:[EMAIL PROTECTED]>
BV��� ���� | <mailto:[EMAIL PROTECTED]>
Senior Tech.�Consultant,� SBM, A Gates/Arrow Co.
Vox 770-623-3430�����������11455 Lakefield Dr.
Fax 770-623-3429���������� Duluth, GA 30097-1511
=================================================
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
kumar
Sent: Thursday, July 06, 2000 5:02 AM
To: [EMAIL PROTECTED]
Subject: DIGI Port Server
Dear All,
I would like to use Digi Port Server to connect Cisco
Router through reverse telnet. I need your help on the
following :-
1. The cable pinout(both end rj45) between Digi Port
server and Cisco Console Port.
2. Minimal configuration required on the Digi port
Server.
thanks for your time
Regards
Kumar
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
