When studying for the exams my interpretation was this:
Use "show access-lists" when you're looking at all of them
Use "show access-list x" when you're looking at one of them.
for the exams anyway.
Kevin Wigle
CCDP, CCNP
----- Original Message -----
From: "Keith Woodworth" <[EMAIL PROTECTED]>
To: "Timothy W. Roberts" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: July 12, 2000 3:45 PM
Subject: Re: Correct show syntax for access lists
>
>
> On Wed, 12 Jul 2000, Timothy W. Roberts wrote:
>
> >>This is relating to taking exams:
> >>
> >>The ACRC Student Guide states that the command to view ALL access-lists
> >>on a router is - show access-list. But on the router is shows it as
> >>being - show access-lists (with an s). Which one will the test want?
> >>Will either work?
>
> they both work on the routers I have here. I would assume that since a
>
> sh access?
>
> brings up access-lists that would be the one for the test since its the
> one on the router.
>
> Keith
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
