I have a 2503 that on every reload, it looks for 4 different type of
configuration files to load via tftp.  How do I turn that off?  There is a
valid startup-config but the router constantly looks for network-confg,
cisconet.cfg, router-confg & ciscortr.cfg, even after completly loading.  I
have included the startup messages, show version & show startup-config.  If
this is an option set in the boot rom, shouldn't the config register be
something different?  Any help would be greatly appreciated!

Thanks,

Brent Case


System Bootstrap, Version 4.14(9.1), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 4096 Kbytes of main memory

Unknown or ambiguous service arg - udp-small-servers
Illegal IP keyword - classless
Loading c2500-j-l_112-13.exe at 0x3000040, size = 7969232 bytes [OK]

F3: 7872580+96620+313640 at 0x3000060

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-J-L), Version 11.2(13), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 31-Mar-98 12:27 by tlane
Image text-base: 0x0303F1E4, data-base: 0x00001000

cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of memory.
Processor board ID 01446664, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Loading network-confg ... [timed out]

Loading cisconet.cfg ... [timed out]

Loading router-confg ... [timed out]

Loading ciscortr.cfg ... [timed out]



Press RETURN to get started!


Router#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-J-L), Version 11.2(13), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 31-Mar-98 12:27 by tlane
Image text-base: 0x0303F1E4, data-base: 0x00001000

ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE

Router uptime is 8 minutes
System restarted by power-on
System image file is "c2500-j-l_112-13.exe", booted via flash

cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of memory.
Processor board ID 01446664, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Router#

Router#sh startup-config
Using 574 out of 32762 bytes
!
version 11.2
service config
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Router
!
enable secret 5 $1$TPq9$pVkiL7hW2bXINhzSQxz2D1
enable password sanfran
!
!
interface Ethernet0
 ip address 192.168.200.101 255.255.255.0
 no cdp enable
 no mop enabled
!
interface Serial0
 no ip address
 shutdown
!
interface Serial1
 no ip address
 shutdown
 no cdp enable
!
interface BRI0
 no ip address
 shutdown
 no cdp enable
!
no ip classless
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
 password cisco
 login
!
end

Router#

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to