Email Cisco Tech support for a answer, sounds like hardware errors.
------Original Message------
From: Ricardo Lowe <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Sent: July 13, 2000 7:52:52 PM GMT
Subject: What causes the following errors on an IGX?
Hello all,
A search through COO has proved unsuccessful. I have an IGX 8410
with a DS-3 connected to a UXM card, and I'm getting the following errors on
a line:
- P-bit Parity Errors
- C-bit Parity Errors
- BIP-8 Card Errors
- Out of Frame Errors (sometimes)
I found on COO what the errors mean, but not what causes them.
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/9_2/cmdref/92cmd14.htm
#xtocid1412951 Could someone explain what would cause those errors or point
me to a resource that would do that, I would really appreciate it.
Ricardo
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
R&S Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
........................................................
iWon.com http://www.iwon.com why wouldn't you?
........................................................
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
