Hi
There are several things that you can do that will increase your
knowledge...
1) Setup the 2514 with NAT/PAT. This will allow you to connect multiple
network devices to the internet.
2) Setup firewalling/ACLs on the 2514. I would recommend the IOS FW feature
set with DES.
3) If your work will allow it, setup a VPN between the two networks.
There are a lot of things you would learn doing these items.
HTH
--
John Hardman, MCSE+I, CCNA
ArrisTech/CCS-IS SysAdmin
""Abdul K"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello group,
>
> I am wondering whether I can make use of the following equipments that I
> have in order to make my practice useful
>
> I have a cable modem connection (dedicated ip address)
> Cisco 2514
>
> and I have also ethernet network for my internal networking connected to a
> hub
>
> I am considering connecting to my office network's Cisco Router which has
an
> external ip address allocated.
> Please direct me or advise on how can I make all these work together.
>
> Thanks in advance. If possible please copy your response to
> [EMAIL PROTECTED]
>
> Abdul Kadir
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
