sort of - you can use them in higher _bandwidth_ densities - you can't
physically get any more cards into the chassis. There is a points system
whereby cards (7500 PAs without the VIPs basically) are assigned a points
value based on high, medium or low bandwidth, and are limited to certain
combinations based on their position on the backplane. The VXR and NPE300
options just up-rate the amount of points you can run across the backplane
check:
http://www.cisco.com/univercd/cc/td/doc/product/core/7206/7206cfig/3471pac6.
htm#xtocid3206
HTH
Andy
----- Original Message -----
Michael Vicchiollo wrote:
> Jim,
>
> See inline
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Jim Garron
> > Sent: Thursday, July 13, 2000 9:12 AM
> > To: [EMAIL PROTECTED]
> > Subject: 7204/7204VXR
> >
> > Can anyone tell me if you can use the cards from a 7204VXR in a 7204.
>
> Yes, in higher densities. See URL for info.
>
> http://www.cisco.com/warp/customer/cc/pd/rt/7200/prodlit/c7200_ds.htm
>
> >
> > And what is the primary difference between the two models.
>
<snip>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
