Dear All,
I need your idea how to manage traffic. On my router have two different
traffic, IP and SDLC. Both protocol was running well on that router. But,
since the IP traffic going up, the SDLC traffic can not running. Now, i just
implement priority-list command and define priority-group on the interface
which running on SDLC traffic but...its not work. The equipment still not
work. Here I Send the configuration
source-bridge ring-group 310
dlsw local-peer peer-id 10.100.101.1
dlsw remote-peer 0 tcp x.x.x.x
dlsw remote-peer 0 tcp y.y.y.y
!
interface Serial0/0
description ===> Leased Line to JAKARTA 64 Kbps
ip address 10.10.5.5 255.255.255.252
no ip mroute-cache
no fair-queue
!
interface Serial0/1
description ==> Local DLSw connection to S121440 & 4F
no ip address
encapsulation sdlc
bandwidth 19200
no keepalive
priority-group 1
sdlc role primary
sdlc vmac 4000.6492.c100
sdlc address 40
sdlc xid 40 017D0564
sdlc partner 4000.4500.0000 40
sdlc address 4F
sdlc xid 4F 017E0577
sdlc partner 4000.4500.0000 4F
sdlc dlsw 40 4F
!
ip route (secure)...
Do you have any idea how to make SDLC traffic become first priority or how
to make SDLC traffic can use 30% bandwitdh from the total bandwidth
Thanks for your help
Erwin Novriyanto
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
