Hi there colleagues,
I have the following problem:
I have a router in Tempe and a router in Paris. From the router in Tempe I
can ping the router in Paris, but I cannot ping a server on the Ethernet
segment in Paris.
The IP address of the router in Tempe is 10.230.13.18/30, the IP address of
the router in Paris is 10.230.13.17/30 ; the IP address of the server on the
Ethernet segment in Paris is 10.100.0.1.
I can ping the server in Paris from the router in Paris, the IP address on
the Ethernet interface on the router in Paris is 10.100.3.4/16
I have also included the route table from the router in Tempe:
Gateway of last resort is 10.230.13.17 to network 0.0.0.0
205.223.99.0/27 is subnetted, 1 subnets
S 205.223.99.64 [1/0] via 10.230.13.17
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
S 10.0.0.0/8 [1/0] via 10.230.13.17
C 10.88.0.0/16 is directly connected, Ethernet0
S 10.83.0.0/16 [1/0] via 10.230.13.17
C 10.230.13.52/30 is directly connected, Ethernet0
C 10.230.13.16/30 is directly connected, Serial0.1
S* 0.0.0.0/0 [1/0] via 10.230.13.17
There are no routing protocols configured on both routers, only static
routes (forget about the BGP route, that's just for our management circuit);
I have also completed the route table of the router in Paris:
Gateway of last resort is 10.100.3.3 to network 0.0.0.0
205.223.99.0/27 is subnetted, 1 subnets
B 205.223.99.64 [20/100] via 10.230.13.30, 2w4d
10.0.0.0/8 is variably subnetted, 19 subnets, 3 masks
S 10.74.0.0/16 [1/0] via 10.230.13.14
S 10.72.0.0/16 [1/0] via 10.230.13.26
S 10.77.0.0/16 [1/0] via 10.230.13.2
S 10.88.0.0/16 [1/0] via 10.230.13.18
S 10.82.0.0/16 [1/0] via 10.230.13.22
S 10.83.0.0/16 [1/0] via 10.230.13.22
S 10.104.0.0/16 [1/0] via 10.230.13.10
S 10.105.0.0/16 [1/0] via 10.230.13.6
C 10.100.0.0/16 is directly connected, Ethernet0/0
C 10.230.13.32/30 is directly connected, Ethernet0/0
C 10.230.13.0/30 is directly connected, Serial1/0:1.1
S 10.230.13.0/24 is directly connected, Null0
C 10.230.13.4/30 is directly connected, Serial1/0:1.2
C 10.230.13.8/30 is directly connected, Serial1/0:1.3
C 10.230.13.12/30 is directly connected, Serial1/0:1.4
C 10.230.13.16/30 is directly connected, Serial1/0:1.5
C 10.230.13.20/30 is directly connected, Serial1/0:1.6
C 10.230.13.24/30 is directly connected, Serial1/0:1.7
C 10.230.13.28/30 is directly connected, Serial1/0:1.983
S* 0.0.0.0/0 [1/0] via 10.100.3.3
Does anybody have an idea of why I cannot ping the server in Paris from the
router in Tempe ? There is an access list active on the Ethernet interface
in Paris, but it only denies ICMP redirects, so it shouldn't have any
influence on the ICMP echoes.
Thanks for your help in avance !
Regards,
Georg Pauwen
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
