Are you using a dynamic routing protocol such as eigrp or ospf?
If so, make sure the network that your e0 is on is being advertised.
If you are using statics, make sure the other router has a route back to
your e0
you can test this by using an extended ping from e0
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 17, 2000 8:46 AM
Subject: Help can not ping accross a Frame Relay link
> Strange situation I can ping from my router accross a 56K frame link and
get 100%, but If I try to ping from a work station I can ping the e0 side of
my router and of course my s0 interface, but not accross the wan link. From
the router I can ping anywhere. What could cause this
problem????????????????????
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
