There are two ways
1. add static route in your Internet router for the Private network to
route the packet to the ISDN router. also add a default route to forward
all other packets. the default gateway for your pc is the Internet router.
2. Enable RIP on both routers . make the following interfaces are passive.
i) WAN interface of the Internet router
ii) Wan interface of the ISDN Router.
I hope the first one is more easy.
regards
siddiqu
--
T. Mohamed Abubakkar Siddiqu CCNA
---- "Tan Choh Koon" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I had Hub site where I would have 2 units of 1720 router, one is for
> leased line to ISP and another for the ISDN DDR to remote spokes.
>
>
>
> PCs -------------------------------e0--RouterA-----------------------
> ISP
> |
> |
> |_____e0--RouterB-- Bri0----------------
> Telco ISDN
>
>
> The PCs are on the LAN with Network 10.10.30.0/24
> e0 on Rotuer A is 10.10.30.1/24
> e0 on Router B is 10.10.30.2/24
> Router A will configure with NAT to let PCs with private address to
> access to Internet
> Router B will configure to dial to spokes site where the networks are
> 10.10.50.0/24 and 10.10.60.0/24 respectively.
>
> I want my PCs can access to Internet and the Intranet , so how can
> I set the Gateway in PCs ???
> If the gateway set is 10.10.30.1/24 then it will not able to communicate
> with Intranet.
>
> Any suggestion ?
>
> Thanks a lot.
>
> C.K.Tan
>
>
__________________________________________________
FREE voicemail, email, and fax...all in one place.
Sign Up Now! http://www.onebox.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
