RE: OSPF in NBMA

[Andrew Larkins]

you will need to specify neighbours under the ospf config for this to work properly. This causes the multicast to be changed to a unicast which is then forwarded across the f/r cloud

-----Original Message-----
From: Irwin Lazar [mailto:[EMAIL PROTECTED]]
Sent: 17 July 2000 16:09
To: 'Wallace Lee'; [EMAIL PROTECTED]
Subject: RE: OSPF in NBMA

Have you tried creating sub-interfaces?

-----Original Message-----
From: Wallace Lee [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 17, 2000 9:16 AM
To: [EMAIL PROTECTED]
Subject: OSPF in NBMA

Hi,
    I have configurating a Frame Relay non-fully mesh network. I know how do this by setting the ip ospf network broadcast and the frame relay mapping.

However, I have enter a problem to setup the Hub router in a OSPF NBMA Frame relay network without using the IP ospf network broadcast or the frame relay map commands. Does anyone how to do this ? Do I need any policy routing or the ospf neighbor command  ?
 
 

rgds