On Thu, 20 Jul 2000, Howard C. Berkowitz wrote:
> >
> > How can I configure unequal cost load balance using OSPF?
> >I have configured equal cost load balance and it is working fine. But,
> >when I try to modify the costs of any link the load balance stop
> >working. What is missing?
> >
> >[EMAIL PROTECTED]
> >Engenheiro de Redes.
> >CREA/MG 66089/D
> >ICQ# 6372 3382
>
>
> OSPF does not support unequal-cost load balancing.
>
> What problem are you trying to solve? Per-packet load balancing can
> indeed improve bandwidth utilization, but at the cost of increased
> processor loads both on routers and end hosts.
CEF per packet is not too bad on the processor. Its not worlds of
difference doing per-packet vs. per-destination in CEF. I prefer CEF much
more to something like say ebgp-multihop
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------------
Brian Feeny, CCNA [EMAIL PROTECTED]
318-222-2638 x 109 http://www.shreve.net/~signal
Network Administrator ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
