No, you don't need a router. A node is determined to be a member of a VLAN by their
MAC address. Layer 2 rather than Layer 3 remember? The router is only needed to deal
with packets destined for anything outside the VLAN. The IP addresses don't matter.
Karen E Young
*********** REPLY SEPARATOR ***********
On 7/20/2000 at 2:53 PM jeongwoo park wrote:
:HI all
:I have a question.
:Cisco recommends that there be one-to-one relationship
:between ip subnets and Vlans.
:When the number of devices on a Vlan exceeds the
:number of host ip addresses per configured subnet,
:more than one subnet can exit on a Vlan.
:Having said that, my question;
:There are two subnets in a Vlan. Do we need a router
:to interconnect these two subnets?
:I know that we need a router to interconnect two
:different Vlans.
:
:Thanks.
:
:jeongwoo
:
:
:__________________________________________________
:Do You Yahoo!?
:Get Yahoo! Mail � Free email you can access from anywhere!
:http://mail.yahoo.com/
:
:___________________________________
:UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
:FAQ, list archives, and subscription info: http://www.groupstudy.com
:Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
