Also, if you have more than one boot statement, make sure they are in the
correct order (i.e. make sure the flash image you want the router to boot
from is listed first). If you do a sh run, it will list the order of the
boot statements.
>From: "David C Prall" <[EMAIL PROTECTED]>
>Reply-To: "David C Prall" <[EMAIL PROTECTED]>
>To: "Cisco groupstudy.com" <[EMAIL PROTECTED]>
>Subject: Re: How to select a diff Flash img to load from ?
>Date: Sat, 22 Jul 2000 20:18:38 -0400
>
> > I have 2 different flash images (11.3 and a 12.01)on a
> > 2610 router, what command can I use to change the IOS
> > image the router uses at next reload.
> > Thanks a lot.
> >
>
>boot system flash <image name>
>
>Make sure that this command doesn't exist already for the current IOS.
>
>David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
