hi
sure you can simulate isdn connection between two routers, provided you have
two separate isdn lines.
connect each router to the isdn lines and confguire using the appropriate
telephone numbers. there are manys ways to do this, ie. only one router
enabled to dial, both routers enabled to dial, routers only dial when
primary line fails etc. check out cisco webb site for details and example
configs.
regards,
av
>From: "Robert Borejszo" <[EMAIL PROTECTED]>
>Reply-To: "Robert Borejszo" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: ISDN BRI simulation....
>Date: Sun, 23 Jul 2000 19:43:41 -0700
>
>Hello everybody:
>Excuse my simple question, but I'm just a novice wanna be CISCO guru. I
>am in the process of building my home lab. At present time I have the
>following equipment:
>
>2503
>2514
>760.
>Both 2503 and 760 comes with ISDN BRI. Is it possible to connect this
>two over ISDN BRI to simulate ISDN communication?
>
>Thanks in advance,
>Robert
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
