Hi Jason,
after adding the line "modem dialin" to my aux port config line, I now get a
password prompt; the problem I have now is that the password prompt doesn't
respond to my keyboard, the passwords just time out. What could be the
reason for this ?
Thanks in advance for your help.
Regards,
Georg
>From: "Jason A. Diegmueller" <[EMAIL PROTECTED]>
>Reply-To: "Jason A. Diegmueller" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Modem/Console port logon problem
>Date: 25 Jul 2000 12:41:55 GMT
>
> > I have a problem when I dial in to a 2610 router; the router has a U.S.
> > Robotics modem attached via the console port. Upon dialing in, I get a
> > connection but no login prompt. When I telnet in to the router at the
>same
> > time and configure something on the router, the terminal window which I
>use
> > for the dial-up connection logs this action, so it looks like my dial-up
> > connection is connected to the router.
> > Do you have an idea why I don't get a login prompt ? Here is the output
>from
> > the running configuration:
> >
> > line con 0
> > exec-timeout 3 0
> > password 7 0526071D354540
> > login
>
>I always have trouble with USR Sporsters unless I specify
> `modem autoconfigure type usr_sportster'
>
>Also, you'll probably going to want to specify `modem Dialin'
>if you're dialing in to it remotely.
>
>Good luck.
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
