Assuming that you don't want to use a RSM either or make them all part of
the same Vlan, I suppose you could just run a cross-over cable from a port
set to vlan X to a port set to vlan Y. Bit naff and you'd need to look at
the spanning tree set up.
What about a using a plain old bridge or setting bridging on a router
connected to both?
Hmm.. or maybe none of the above
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of joe
Sent: 25 July 2000 01:25
To: [EMAIL PROTECTED]
Subject: Simple question on VLANS
Can I enable communication between two vlans without using a MSFC card or a
router.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
